5-26 Image Optimization
No shadow or absent signal along the scan plane.
Clear profile of anatomy through the entire scan plane without distortion.
Skin line is continuous.
The images are captured from the same plane.
There is no large black area in the image.
5.11.4 Cine Review
Click [Review Cine] on the image menu in panoramic image viewing status to enter cine
reviewing mode. In cine reviewing mode, there is a green frame marker indicating the
sequence of currently reviewed image in the panoramic image on the left side of screen.
In cine review status:
Roll the trackball to review the captured images frame by frame.
Click [Auto Play] to start or end auto play.
In auto play mode, click [Auto Play] on the image menu; or, press/rotate the
corresponding knob to change the play speed.
Review to a certain image; click [Set First Frame] to set the start point. Review to
another image; click [Set End Frame] to set the end point. In auto play mode, the
review region is confined to the set start point and end point.
Click [Return] item on the image menu to exit the cine review mode, and there
displays the panoramic image.
In cine review mode, press <Freeze> on the control panel to return to the acquisition
preparation status.
To Next Page
Loading...
Need help?
General
