6/1531-ASP11301 Uen T2 2015-04-23 14
C
ABLING
Figure 9: Workflow for the MX-ONE Installation
7 CABLING
Cabling involves both internal and external connections on site.
External cabling is the routing of cables for grounding, to power equipment and other
external devices.
Internal cabling is the routing of cables within a cabinet or between cabinets.
For details about cables, cable connection and marking see document
21/1531-ASP11301 INSTALLATION BOARDS AND CABLING chapter 3.
Use the fastener straps (cable tie) provided in material set 25/BYB 501/1 to fasten the
cables to the rack, cable chutes, rear sides of chassis and so on.
To Next Page
Loading...
Need help?
General
