26
Controller operation-Function settings
Timer (On/Off timer)
1
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Select "Timer" from the Main menu (refer to page
20), and press the SELECT button.
2
F1 F2 F3 F4
Timer
Setting display:
Cursor
On/Off timer Yes
On Off
Repeat No
Auto-off No
Stop in
--- min
The current settings will appear.
Move the cursor to the On/Off timer, and press
the SELECT button.
P
F1 F2 F3 F4
Timer
Select:
Cursor Cursor
On/Off timer No / Yes
On
Off
Repeat No / Yes
The screen to set the timer will appear.
Select the desired item with the F1 or F2
button out of "On/Off timer," "On," "Off," or
"Repeat."
The On/Off timer will not work in the following cases:
when On/Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, when the clock is not set,
during Function setting, when the system is centrally
controlled (when On/Off operation or Timer operation from
local remote controller is prohibited).
3
Main
Button operation
To Next Page
Loading...
Need help?
General
