13
Performing a System Test
You can test the system setup in ADVANCED MENU
under SYSTEM TEST option.
1 Press and hold Menu on the controller for 5
seconds to access ADVANCED MENU options.
2 Touch
or to go to SYSTEM TEST.
3 Touch Select or touch text area.
4 Touch
or to select system test type. Touch
Select or the touch text area.
5 For the Heat Test and Cool Test use
or to activate equipment.
Note: The clock is used as a timer while
Heat or Cool is running. The Heat and Cool
indicators are displayed when the system test
is running.
kumo cloud
®
Connecting to the kumo cloud
®
: The Wireless Interface 2 or later must be installed and
configured with the kumo cloud app before continuing with the startup of the MHK2.
Automatic Setting of Time Provided by the Wireless
Interface
When a Wireless Interface is present, the MHK2 Controller will operate using the time and date the
Wireless Interface receives from the Internet. In the event of a system power outage, the MHK2
Controller’s time and date setting will be independent until such time as the Wireless Interface
regains an Internet connection. At that point, the MHK2 Controller will again match the Wireless
Interface’s Internet-acquired time and date.
33-00446EFS_B.indd 13 10/17/2019 3:09:01 PM
To Next Page
Loading...
Need help?
General
