Mitsubishi Heavy Industries RC-EXZ3A User Manual

− 45−
7
Tap a desired fan speed.
If the
No setting
button is tapped, it operates at the last action. (
☞
4)
8
After setting the desired contents at the screen of the step 4 on the
previous page, tap the
Set
button.
Operation will start at set hours later.
6
Select a desired temperature (at 1°C intervals) with the
▲ ▼
buttons. Or tap the
Auto
button and select the
auto temp setting.
Tap the
Set
button after the adjustment. (
☞
4)
When the
No setting
button is tapped, “
-- °C” is displayed, and it
starts operation at the last setting temperature.
Set ON timer by hour
No setting Back
Tap
▲▼
to set temp & tap [Set].
Auto
Set
Set ON timer by hour
No setting Back
Select the fan speed.
Auto
9
Tapping the
Zones
button makes it possible to perform zone operation
settings at the time of timer working. Set No
setting / ON / OFF (No
setting/OPEN/CLOSE) for each zone during timer operation.
→
No setting
→
ON
→
OFF
Setting No setting will operate in the previous zone state at the time of
timer working.
After the setting, tap the Set
button.
The display returns to the previous screen.

Mitsubishi Heavy Industries RC-EXZ3A Specifications

General

Brand	Mitsubishi Heavy Industries
Model	RC-EXZ3A
Category	Remote Control
Language	English