− 44−
■Set ON timer by hour
When the set time elapses, the air conditioner starts.
1
Tap the
Menu
button on the TOP screen and select
Useful functions
⇒
Timer
⇒
Set ON timer by hour
.
2
The Set ON timer by hour setting screen is displayed.
Select desired hours for the period to start operation by timer with
the
▲
▼
buttons.
Range of setting time: 1 to 12 hours (at 1-hr intervals)
3
When operating conditions at the start of operation are set, tap the
Next
button. (
☞
4)
When operating conditions are not set, tap the
Set
button.
· To warm up the room temperature closed to the set temperature at the set start time of the operation, the microcomputer estimates the
start time of the operation based on the last warming up operation and starts the operation 5 to 60 minutes earlier.
· When the warming up is turned ON, set the timer at one hour earlier or more than the start operation by timer.
If it is set in less than one hour, a message
“
Warming up cancelled
”
is displayed on the screen. (This is used as the Set ON timer by hour
and clock.)
Advice Warming up
5
Tap a desired operation mode.
If the
No setting
button is tapped, it starts operation at the last
action. (
☞
4)
Set ON timer by hour
Set Back
hours
Tap ▲▼ to set clock time & tap [Set].
A/C will start at the set hours later.
CancelNext
Cooling
Set ON timer by hour
No setting Back
Please select operation mode.
Fan
Heating
Dry
Auto
4
Set the following operating conditions.
①
Warming up ON/OFF
(the Main R/C only)
②
Operation mode … ☞5
③
Set temp … ☞6
④
Fan speed … ☞7
⑤
Zones … ☞9
■Warming up setting can be made with the main R/C only.
■Set the operation mode before setting the set temperature.
To Next Page
Loading...
Need help?
General
