3. Insert a straight blade (or minus) screw-
driver with a cloth over its tip into notch
(A) or the cover. Pry gently as shown to
remove the cover.
4. Depress the brake pedal with the right
foot.
5. Insert a straight blade (or minus) screw-
driver in the shiftlock release hole (B).
Shift the selector lever to the “N” (NEU-
TRAL) position while pressing the
straight blade (or minus) screwdriver
down.
Selector lever position display
E00602301610
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the position of the selector lever is indi-
cated in the multi-information display.
When the selector lever posi-
tion display blinks
E00637700057
WARNING
l
To avoid unintended vehicle movement,
keep the brake pedal applied with your
right foot and do not depress the accelera-
tor pedal, while the selector lever position
display is blinking.
INVECS-III CVT with 8-step Sports Mode*
6-32
OGKE18E1
Starting and driving
6
To Next Page
Loading...
Need help?
General
