Mitsubishi HC7000 User Manual

EN-25
Menu operation
Menus are not displayed when no signal is supplied to the projector.
IMAGE GAMMA MODE AUTO, SPORTS, VIDEO, CINEMA
USER1
REFERENCE SPORTS, VIDEO, CINEMA
USER2
ADJUST MODE ALL, RED, GREEN, BLUE
CONTRAST ±30 HIGH ±10(R) ±10(G) ±10(B)
BRIGHTNESS ±30 MID ±10(R) ±10(G) ±10(B)
COLOR TEMP.
HIGH BRIGHTNESS LOW ±10(R) ±10(G) ±10(B)
COOL
REFERENCE COOL, MEDIUM, WARM
MEDIUM
CONTRAST R ±60
WARM
CONTRAST G ±60
USER
CONTRAST B ±60
BRIGHTNESS R ±60
COLOR ±10
BRIGHTNESS G ±60
TINT ±10
BRIGHTNESS B ±60
SHARPNESS *1 ±10
ADVANCED MENU
OK
SCREEN SIZE 16:9, CINEMA SCOPE (2.35:1)
AV MEMORY SAVE
AV MEMORY1
VERTICAL LOCATION ±26
AV MEMORY2
AUTO IRIS AUTO 1-5
AV MEMORY3
OFF
TRNR *9 0 - 15
MNR *9 0 - 15
BAR *9 ON , OFF
CTI *1 0 - 5
INPUT LEVEL
±5
(for analog signal input)
AUTO, ENHANCED, NORMAL
(for digital signal input)
*10
INSTALLATION KEYSTONE ±15 OPTION FILTER ON, OFF
LAMP MODE STANDARD, LOW
AUTO POWER ON ON , OFF
AUTO POWER OFF OFF, 5, 10, 15, 30, 60min
SPLASH SCREEN ON, OFF
BACK COLOR BLUE, BLACK
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
TRIGGER OUT SCREEN, ANAMORPHIC, OFF ZOOM/FOCUS LOCK ON, OFF
TEST PATTERN
CROSS HATCH , WHITE , BLACK
LENS SHIFT LOCK ON, OFF
LENS LOCK
OK
LENS SHIFT RESET
OK
FEATURE ASPECT AUTO, 4:3, 16:9, ZOOM1, ZOOM2, STRETCH, ANAMORPHIC1, ANAMORPHIC2 *4
PASSWORD FUNCTION
DISPLAY INPUT , MENU ACCESS
LOCK
OK
MENU POSITION 1 (Upper left), 2(Lower right) UNLOCK
OK
MENU DIMMER ON, OFF
CINEMA MODE *2 AUTO, VIDEO, FILM
VIDEO SIGNAL *3 AUTO, NTSC , PAL , SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
SETUP *1 AUTO, OFF, 3.75%, 7.5%
SCART INPUT *8 ON, OFF
LANGUAGE
, English, Español, Deutsch, Français, Italiano, , , , PORTUGUÊS
RESET ALL
OK
SIGNAL HORIZ.POSITION *6 0 - 999 *4
VERT.POSITION *6 0 - 999 *4
FINE SYNC. *5, *6 0 - 31
TRACKING *1, *5, *6 0 - 9999 *4
COMPUTER INPUT *5 AUTO, RGB, YC
B
C
R
/ YP
B
P
R
OVER SCAN 100 - 90% *4
HOLD *5, *6 OFF BEGIN 0 - 99
ON
END 0 - 99
USER
OK
CLAMP POSITION *5, *6 1- 255 *4
CLAMP WIDTH *5, *6 1- 63 *4
INFORMATION LAMP TIME(LOW)
VERT.SYNC AUTO, OFF
INPUT
LPF *5, *6, *7 ON, OFF
RESOLUTION
SHUTTER(U) 0 - 32
VERTICAL FREQUENCY
SHUTTER(L) 0 - 32
HORIZONTAL FREQUENCY
SHUTTER(LS) 0 - 95
SYNC. TYPE *5, *6
SHUTTER(RS) 0 - 95
* 1: Not available with certain signals.
* 2: Available only when the input signal is TV50, TV60, 480i, 576i or 1080i.
* 3: Available only when the input signal is from the VIDEO IN or S-VIDEO IN terminal.
* 4: Setting range differs depending on the input signals.
* 5: Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.
* 6: Not available when the input signal is from the HDMI IN terminal.
* 7: Available only when the input signal is 480i, 480p, 576i, or 576p.
* 8: Available only when the input signal is from the COMPUTER IN/COMPONENT VIDEO IN terminal.
* 9: Available only when the input signal is 480i, 480p, 576i, 576p, TV60 or TV50.
*
10 : Available only when RGB output is selected on the output device side.
•

Mitsubishi HC7000 Specifications

General

Matrix size	0.7 \
Vertical scan range	50 - 120 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	50 - 300 \
Keystone correction, vertical	-15/15 °
Lamp power	160 W
Light source type	Lamp
Service life of light source (economic mode)	5000 h
Focal length range	23.5 - 37.6 mm
Audio input	1
Dimensions (WxDxH)	427 x 440 x 159 mm
Power requirements	AC 100-240V, 50/60Hz
Connectivity technology	Wireless
Noise level	17 dB
Dot clock scanning frequency	162 MHz
Full HD	No
Analog signal format system	NTSC, PAL, SECAM
Serial interface type	RS-232
Power consumption (typical)	250 W

Weight and Dimensions

Weight	7500 g