Mitsubishi HC7000 User Manual

EN-31
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu.
(See page 26 for menu setting.)
Display the IMAGE menu.
Select CONTRAST or BRIGHTNESS by pressing the S or T button.
Adjust the selected item by pressing the W or X button.
To cancel the menu:
Press the MENU button.
CONTRAST
Select to adjust the contrast of the image. Every time the X button is pressed, the image becomes brighter and more
defi ned. Every time the W button is pressed, the image becomes darker and less defi ned.
BRIGHTNESS
Every time the X button is pressed, the image becomes brighter. Every time the W button is pressed, the image
becomes darker.
To adjust the color (COLOR and TINT):
You can adjust the color of the projected image using the menu.
(See page 26 for menu setting.)
Display the IMAGE menu.
Select COLOR or TINT by pressing the S or T button.
Adjust the selected item by pressing the W or X button.
To cancel the menu:
Press the MENU button.
COLOR
Use to adjust the color intensity of the projected image. Every time the X button is pressed, the color intensity
increases. Every time the W button is pressed, the color intensity decreases.
TINT
Use to adjust the tint of the projected image. Every time the X button is pressed, the image appears more greenish.
Every time the W button is pressed, the image appears more reddish.
To sharpen or soften the projected image (SHARPNESS):
You can adjust the sharpness of the projected image using the menu.
(See page 26 for menu setting.)
Display the IMAGE menu.
Select SHARPNESS by pressing the S or T button.
Adjust the selected item by pressing the W or X button.
To cancel the menu:
Press the MENU button.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
Adjusting projected images

Mitsubishi HC7000 Specifications

General

Matrix size	0.7 \
Vertical scan range	50 - 120 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	50 - 300 \
Keystone correction, vertical	-15/15 °
Lamp power	160 W
Light source type	Lamp
Service life of light source (economic mode)	5000 h
Focal length range	23.5 - 37.6 mm
Audio input	1
Dimensions (WxDxH)	427 x 440 x 159 mm
Power requirements	AC 100-240V, 50/60Hz
Connectivity technology	Wireless
Noise level	17 dB
Dot clock scanning frequency	162 MHz
Full HD	No
Analog signal format system	NTSC, PAL, SECAM
Serial interface type	RS-232
Power consumption (typical)	250 W

Weight and Dimensions

Weight	7500 g