Filling the fuel tank
E00200202328
WARNING
l
When
handling fuel, comply with the safe-
ty regulations displayed by garages and
filling stations.
l
Before removing the fuel cap, be sure to
get rid of your body’s static electricity by
touching a metal part of the car or the
fuel pump. Any static electricity on your
body could create a spark that ignites
fuel vapour.
l
Perform the whole refueling process
(opening the fuel tank filler door, remov-
ing the fuel cap, etc.) by yourself. Do not
let any other person come near the fuel
tank filler. If you allowed a person to
help you and that person was carrying
static electricity, fuel vapour could be ig-
nited.
l
Do not move away from the fuel tank fill-
er until refueling is finished. If you
moved away and did something else (for
example, cleaning your windscreen) part-
way through the refueling process, you
could pick up a fresh charge of static elec-
tricity.
l
If the tank cap must be replaced, use only
a MITSUBISHI MOTORS original part.
Fuel tank capacity
2WD: 59 litres
4WD: 55 litres
Refueling
1.
Before filling with fuel, stop the engine.
2. The
fuel tank filler is located on the rear left
side of your vehicle.
Open the fuel tank filler door by pulling the
release lever located on the side of the driv-
er’s seat.
3. Open
the fuel tank filler tube by slowly turn-
ing the cap anticlockwise.
A- Remove
B-
Close
CAUTION
l
Since
the fuel system may be under pres-
sure, remove the fuel tank filler tube cap
slowly. This relieves any pressure or vac-
uum that might have built up in the fuel
tank. If you hear a hissing sound, wait un-
til it stops before removing the cap. Oth-
erwise, fuel may spray out, injuring you
or others.
General information
03
To Next Page
Loading...
Need help?
General
