2. While holding down the tab (A), pull out the
bulb.
3. To
install the bulb, perform the removal
steps in reverse.
NOTE
l
When mounting the lens, align the tabs (B)
with the holes on the vehicle body.
Cargo room lamp
E01005300325
When
replacing the bulb, put the cargo room lamp
switch into the “OFF” position.
1. Insert a straight blade (or minus) screwdriver
with a cloth over its tip into the notch of the
lamp assembly and pry gently to remove the
lens.
2. Remove the bulb by pulling it out.
3. To
install the bulb, perform the removal
steps in reverse.
Maintenance
8-42
8
To Next Page
Loading...
Need help?
General
