EasyManuals Logo

Mitsubishi Lancer Sportback User Manual

Mitsubishi Lancer Sportback
433 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
a flat object such as a level, flat road surface.
This may make the distance to a projecting
object shown on the screen differ from the ac-
tual distance to the projecting object. Do not
use them as a guide for distances to solid ob-
jects.
Example: On the screen the point B appears
the nearest, then the point C and A in order
of distance. The points A and B actually are
the same distances from the vehicle, and the
point C is farther off than the points A and B.
To change the indication on the screen
of the inside rear-view mirror
E00631300080
It
is possible to turn off the screen of the inside rear-
view mirror and change the language of the warn-
ing messages on the screen.
To temporarily set the non- display mode
If
you press the switch (1) while the image appears
on the display, it goes off temporarily.
To return to display mode, press the switch again
or turn the ignition switch to the “ON” position af-
ter turning to “LOCK” or “ACC” position.
To permanently set the non- display mode
1. Turn the ignition switch to the “ON” position.
CAUTION
l
For
safety reasons, do not perform follow-
ing operations with the engine running.
2. Put
the gearshift lever or the selector lever in
the “R” position.
3. Press
and hold down the switch (1) (for
about 15 seconds).
While you keep the switch pressed, the or-
ange indicator (2) comes on. When the im-
age goes off, the non-display mode setting is
completed.
To change the language of warning text(3)
E00630500027
1. Turn
the ignition switch to the “ON” position.
CAUTION
l
For
safety reasons, do not perform follow-
ing operations with the engine running.
2. Put
the gearshift lever or the selector lever in
the “R” position.
3. Press and hold down the switch (1) to enter
language selection mode (for 6 to 11 seconds).
In this mode, the image appears and the
green indicator (2) comes on.
4. Press the switch until the desired language ap-
pears on the display.
Each time you press the switch, the language
will change to the next one. When the warn-
ing text flashes, setting is completed.
Starting and driving
4-65
4
OG4E12E1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Lancer Sportback and is the answer not in the manual?

Mitsubishi Lancer Sportback Specifications

General IconGeneral
BrandMitsubishi
ModelLancer Sportback
CategoryAutomobile
LanguageEnglish

Related product manuals