Mitsubishi MELSEC-A series Operating Manual

5. OPERATING , * c. __ ~ , PROCEDURES . , .. .
ME3SEC-A
5.4.2 How to Input lnstructlons
The methods of inputting instructions to the ABPUE are as follows:
1) To use the instruction shown on a key, press the instruction key.
2) Press the alphanumeric character keys that correspond to each character
3) Select and input an instruction by using the help function.
How to input instructions using 1) and 2) is shown below.
Section
6.2.3 explains how to input instructions using 3).
of an instruction sequentially.
POINT
When inputting an instruction, the input contents are displayed on the
4th line (at the bottom)
of the display.
When the (SPACE] key has to be pressed in the following explanation,
if a blank is inserted automatically between an input instruction and the
cursor position, the [SPACE] key does not have to be pressed.
See the examples for each explanation.
(1) Only in the case of an instruction code
' Instruction key ' + [GO]
(Example) When [END] is input
L _________________ J
0
f
5- 15

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English