OTE
● If you wish to listen to another station of the same PTY as
currently selected, repeat the previous procedure from
step 2.
● To display the station name and the PTY, press the DISP
button (4) and the PTY button (8) respectively.
● If no station is found with your desired PTY, “EMPTY”
will appear on the display for 5 seconds. Then the radio
will return to the previous station and exit the PTY mode.
● If the radio cannot read the station name, the PTY and the
frequency will alternately appear on the display for 6 sec-
onds. Then the radio will start receiving the program and
exit the PTY mode.
Scan function
1. After selecting your desired PTY, press the SCAN button
(9). The radio will tune consecutively to each available
station of the selected PTY for about 5 seconds per sta-
tion.
2. To stop the scan mode, press the SCAN button again.
BK0122500US.book 55 ページ ２０１０年５月１２日 水曜日 午前１１時１１分
To Next Page
Need help?
General
