11SDW01 Operation Manual
Locking the Controller
To limit or prevent access to the controller, you can
enable either of the two lockout settings:
Child Lock: No access is allowed without a PIN code.
Comfort Lock: Only the temperature can be changed.
Selecting a Lock Setting
1) Navigate to the Settings menu.
2) Select to the Access Control sub-menu.
3)
Select the desired screen lock type. (Comfort or Child)
4) Set your desired PIN code.
5) Write it down _ _ _ _ and keep it in a safe place for
later reference.
6) Press Lock to activate the setting.
Removing a Lock Setting
1) Navigate to the Settings menu, press the dial, and a
pop-up will appear asking for your PIN code
2) Enter your PIN code and select Unlock.
Notes:
• A “locked” icon will appear by features that
are now locked. Child Lock, Comfort Lock,
and certain settings in the ISU menu can
trigger the lock symbol, but only Child and
Comfort Lock and be unlocked with the PIN.
• Child Lock and Comfort lock cannot be
selected or congured if a lockout is
enabled in the ISU menu.
• If entering your PIN does not remove the
lock symbol, then you must disable the
lockout setting in the ISU menu to make
the necessary changes.
To Next Page
Loading...
Need help?
General
