6. PROPER SEWING
6-1. Operation of the emergency stop switch
If an emergency such as a thread breakage, needle breakage and any other emergency is
happened during the sewing operation, please hit immediately the emergency stop switch. The
sewing machine running is stopped instantly.
Before start the sewing operation, please make sure the location of the emergency
stop switch and keep it in mind the function and how to use it.
Please Keep away the hands and the face from the needle during the sewing
operation.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Press the HALT switch (NO.
), All operations will stop, and the sewing machine will stop at the
needle UP state without trimming the thread.
Remove the cause of the abnormality.
To continue sewing, turn the HALT switch button to the right. The switch will be unlocked.
Next, when the start switch (NO.
) (gray foot switch) is pressed again, the operation will resume
from the halted position.
To cancel sewing, turn the HALT switch (NO.
) button to the right, and unlock the switch.
Then, press the HOME POSITION RETURN key (NO.
) of the teaching panel.
The work holder (NO.
) will return to the home position from the stopped position and will stop.
④
16
To Next Page
Loading...
Need help?
General
