1 SAFETY
Mitsubishi Diesel Engine S12R OPERATION & MAINTENANCE MANUAL
74
Pub. No. 291Y1-40720 Revision: 5
Risk of Fire
Although it is important to strive to prevent fire,
training on a routine basis is necessary for fire
prevention.
The following is general fire prevention measures.
• Do not leave combustible materials near the
fire-using area.
• If you have to use fire, obtain permission
from the user company or supervisor in
advance.
• When conducting welding or gas cutting
works, use an incombustible sheet, etc. to
prevent a fire.
• When using fire, have a fire extinguisher
handy.
• Cleanup after using fire.
• Install fire extinguishers and fire hydrants
and perform periodic replacement.
• If the coating of electric wiring is damaged,
repair or replace promptly.
• To prevent a fire due to deteriorated wiring,
inspect the wiring for deterioration and
replace as required.
• Take measures to prevent generation of
static electricity.
In addition to above, always conduct the measures
for fire prevention.
Fig. 1-21 Fire Hazard
Communication with MHIET
Please inform MHIET about the points you have
noticed about safety when contracting and having
the engine delivered, or while operating the engine.
MHIET is willing to have sufficient communication
with the customer.
Fig. 1-22 Communication with MHIET
• For the details described in this
Operation & Maintenance Manual, if
you want to have more detailed
information or questions, contact your
MHIET dealer "
CONTACT LIST" (→
Page 10)
• If you establish the protection
measures, use this Operation &
Maintenance Manual and warning
labels on this engine and each device
as "Usage Information".
To Next Page
Loading...
Need help?
General
