ELECTRICAL SYSTEM
12-12
2.4 Reassembling starter
2.4.1 Applying grease
&$87,21
To avoid mixing of different greases, remove old grease before applying new grease.
Make sure that the starter mounting surface, brushes, commutator and other electric current conducting compo-
nents are free from grease.
When overhauling the starter, apply grease to the following sliding surfaces, gears and bearings.
Reassembling starter
10.8 ± 1.0 N·m
{1.1 ± 0.1 kgf·m}
[8 ± 0.7 lbf·ft]
3.32 ± 0.77 N·m
{0.34 ± 0.08 kgf·m}
[2 ± 0.6 lbf·ft]
MOLYKOTE AG-650
(Dow Corning Toray CO.,Ltd.)
or equivaleat
Multemp #6129
(KYODO YUSHI CO.,LTD.)
or equivalent
Multemp OA-171
(KYODO YUSHI CO.,LTD.)
or equivalent
Multemp #6129
(KYODO YUSHI CO.,LTD.)
or equivalent
To Next Page
Loading...
Need help?
General
