SERVICE TOOLS
3-3
2. Special tool
Table 3-2 Special tool list (1 / 3)
Tool name Part No. Shape Use
Compression gauge 33391-02100
Engine compression pressure
measuring
0 to 7 MPa {0 to 71.4 kgf/cm²}
[0 to 1015.54 psi]
Gauge adapter 30691-21100
Engine compression pressure
measuring
Turnine handle 30691-21800 Engine turning
Valve spring pusher 30691-04500
Valve spring removal/installa-
tion
Valve guide remover 32A91-00300 Valve guide removal
Valve sheet insert caulking
tool
Inlet: 30691-02700
Exhaust:
30691-02800
Valve seat installation
Stem seal installer 32C91-10400 Stem seal installation
To Next Page
Need help?
General
