-
97
-
(ii) When manipulating the remote control mounted on a
wall:
Make sure that it works normally (i.e., transmission/reception
signal is audible) before mounting.
Notes (1) The remote control is correctly facing the
sensing element of the air conditioner when being
manipulated.
(2) The typical coverage is indicated (in the left
illustration). It may be more or less depending on
the installation.
(3) The coverage may be less or even nil. If the sensing
element is exposed to strong light, such as direct
sunlight, illumination, etc., or dust is deposited on
it or it is used behind a curtain, etc.
or less
5 m or less
Wireless remote
control
5 m or less
Remote control
available in this area.
Receiver
or less
(6) Precautions for wireless remote control installation and operation
(a) Wireless remote control covers the following distances:
(i) When operating facing the air conditioner:
or less
If the distances exceed the area indicated above, be sure to check
the receiver status.
To Next Page
Loading...
Need help?
General
