-
137
-
Unit indication section
Models All models
RUN light (green)
·
Illuminates during operation.
TIMER light (yellow)
Illuminates during TIMER operation.
ECONOMY light (orange)
Illuminates during ECONOMY operation.
HI POWER light (green)
Illuminates during HI POWER operation.
RUN ECONO TIMER
POWER
HI
(2) Unit ON/OFF button
When the remote control batteries become weak, or if the remote control is lost or malfunctioning, this button may be used to turn
the unit on and off.
(a) Operation
Push the button once to place the unit in the automatic mode. Push it once more to turn the unit off.
(b) Details of operation
The unit will go into the automatic mode in which it automatically determines, from room temperature (as detected by
sensor), whether to go into the cooling or thermal dry modes.
(3) Power blackout auto restart function
(a) Power blackout auto restart function is that records the operational status of the air-conditioner immediately prior to it being
switched off by a power cut, and then automatically resumes operations at that point after the power has been restored.
(b) The following settings will be cancelled:
(i) Timer settings
(ii) High-power operations
Notes (1) The power blackout auto restart function is set at on when the air-conditioner is shipped from the factory.
Consult with your dealer if this function needs to be switched off.
(2) When power failure ocurrs, the timer setting is cancelled. Once power is resumed, reset the timer.
(3)
If the jumper wire (J7) “REMOTE/AUTORESTART” is cut, auto restart is disabled. (See the diagram at right)
Function
Room temperature
Operation mode
setting
Fan speed Flap Timer switch
Cooling About 25ºC
Thermal dry About 25ºC
Auto Auto Continuous
Unit ON/OFF button
To Next Page
Loading...
Need help?
General
