2.9
Packing for Travel
When it's time to head out to the installation site, place all L6Q hardware and installation tools back into
the box or into the optional add-on Quick Deployment Carry Case. The case is designed to carry the
L6Q kit safely and securely, minimizing trips up and down ladders.
Figure 19: L6Q Quick Deployment Carry Case
Procedure:
1 Power off the camera by pressing and holding the power button until the light turns off.
2 To pack the camera for transportation to the installation site, place the camera and accessories
into the Quick Deployment Carry case or the original packaging in their corresponding spots.
3 Zip the case closed or close the box to secure the contents.
4 If using the case, adjust the strap so that it can be comfortably and securely carried.
MN008660A01-AC
Chapter 2 : Pre-Installation
35
To Next Page
Loading...
Need help?
General
