3.6
Camera Aiming
Camera aiming is essential to maximize the license plate capturing performance of the camera. Proper
aiming ensures that license plates traveling through the camera’s field of view are at an ideal height
and angle to generate an image that is as clear and readable as possible.
3.6.1
Preparing for Camera Aiming
Use the mobile phone holder to allow for one hand adjustment of the camera.
Procedure:
1 Slide the mobile phone into the included mobile phone holder and hook it onto the lower metal
band tie.
NOTE: Give the phone holder a light tug to ensure that it is securely hooked on the pole
strap before letting it hang.
3.6.2
Adjusting the Capture Zone
Prerequisites: When possible, use a test vehicle or hang a license plate in the road at vehicle height
to determine the best capture point.
Procedure:
1 In the Mobile Companion app, tap Begin Aiming.
Figure 30: Application - Aiming
MN008660A01-AC
Chapter 3 : Hardware Installation
51