Motorola Astro APX Mobile 05 control head User Manual

Advanced Features
English
86
3 Press the Menu Select button directly below SEL.
4 > or < to desired waypoint.
5 Press the Menu Select button directly below OPTN. The
display shows VIEW.
6 Press the Menu Select button directly below SEL.
7 > or < again to view longitude, time and date the waypoint
was detected.
8 Press the Menu Select button directly below BACK to return
to previous Waypoint screen.
OR
Press
H or the PTT button (if preprogrammed) to exit this
menu.
Editing the Alias of a Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 > or < to WAYPOINTS.
3 Press the Menu Select button directly below SEL.
4 > or < to desired waypoints.
5 Press the Menu Select button directly below OPTN.
6 > or < to EDIT NAME and press the Menu Select button
directly below SEL.
7 A blinking cursor appears in the Edit Name screen.
Use the keypad to edit the alias.
Press
< to move one space to the left.
Press
> to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
8 Press the Menu Select button directly below OK once you
are done.
OR

O5Head_6875947m01.book Page 86 Tuesday, November 1, 2011 12:06 PM

Motorola Astro APX Mobile 05 control head Specifications

General

Brand	Motorola
Model	Astro APX Mobile 05 control head
Category	Radio
Language	English