GETTING STARTED
11
Getting Started
English
GETTING STARTED
BATTERY INFORMATION
Battery Status
You can check your radioÕs battery status by
either pressing the programmed Battery Gauge
button (battery status is shown by the LED
indicator) or by looking at the P icon.
NOTE: If the Battery Gauge indicators (LED and
display) does NOT appear, this indicates that the
battery may not be a genuine Motorola product.
Charging your Battery
When the battery level is very low, you need to
recharge the battery before you can continue to
use your radio.
1. Place the radio with the battery attached or the
battery alone in the charger.
2. The chargerÕs LED would indicate the charging
progress.
NOTE: Because new batteries or batteries that
have not been used for several months could
prematurely indicate full charge (solid green
LED), charge the batteries for 14 to 16 hours
prior to initial use to achieve optimal perfor-
mance.
Battery
Level
LED
Indicator
Iconic
Indicator
High Green 4 bars
Satisfactory Yellow 2 or 3 bars
Low Flashing Red 1 bar
Very Low None
No bar, but
ßashing.
LED color Status
Single ßash of Green Successful charger power-up.
Flashing Red* Battery is unchargeable.
Flashing Yellow
Charger is getting ready to
charge.
Red Battery is charging.
Flashing Green
Battery is 90% charged.
Green Battery is fully charged.
*
Remove the battery from charger and use a pencil eraser to
clean the four metal contacts on the bottom of the battery.
Place the battery back into the charger. If the LED indicator
continues to ßash red, replace the battery.
A standard battery may require one hour to charge to 90%
capacity.
To Next Page
Loading...
Need help?
General
