Motorola IT6 User Manual

32 Advanced settings
4. Press M to conrm.
5. Press
e to return to standby.
NOTE
The use of your IT6 cannot be guaranteed on all PABX.
8.5 Dial mode
The default IT6 dialling mode is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press
M, scroll d to Advanced Set and press M.
2. Scroll
d to Dial Mode . Press M.
3. Press
u or d to select Tone or Pulse .
4. Press
M to conrm.
5. Press
e to return to standby.
8.5.1 Temporarily switch from Pulse to Tone dialling
1. In talk mode press and hold for 2 seconds.
The dial mode will change from Pulse to Tone for the duration of the call.
8.6 Registration
Up to 4 handsets can be registered to one base station. Additional handsets must be
registered to the base before you can use them.
• The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
8.7 Register a handset
At the base:
1. Press and hold the
p button on the base until the base beeps. You have 120 seconds
in which to register a handset.
At the handset:
1. Press
M, scroll d to Advanced Set and press M.
2. Scroll
d to Register and press M.
3. When the display shows
PIN , enter the base PIN and press M.
When the handset registers with the base, it is assigned a handset number.
8.8 Un-register a handset
Use one handset to delete another. You cannot delete the handset that you are using.
1. Press
M, scroll d to Advanced Set and press M.
2. Scroll
d to Unregister and press M.

Motorola IT6 Specifications

General

Brand	Motorola
Model	IT6
Category	Cordless Telephone
Language	English