37Using your Answering Machine
9.6.4 Record, play or delete your personalized outgoing message
Record also invites your callers to leave a message. Answer Only lets callers hear your
announcement but they cannot leave a message.
1. Press
M, scroll u or d to
Answ Machine
and press M.
2. Scroll
u to
Answer Mode
and press M.
3. Scroll
u or d to select
Record also
or
Answer only
and press M. Use the u or d key
to select
Personalized
then press M.
4.
Play
is displayed.
• Press M to play the current message.
• Scroll d to select
Record
- press M. Display shows
Recording
and a beep is
emitted. Speak your message. Press
M to end recording.
• Scroll d to select
Delete
- press M. The pre-recorded message will be
automatically reinstated.
5. Press
e to return to standby.
9.7 Answering machine settings
9.7.1 Ring delay
Select the duration of rings before your answering machine picks up the call. Choose from
2 to 9 Rings or Toll Saver.
NOTE
If Toll Saver is selected, you will save the time and cost of a call:
• If you have new messages your phone answers after 2 Rings.
• If there are no new messages it will answer after 4 Rings.
1. Press
M, scroll u or d to
Answ Machine
and press M.
2. Scroll
d to
Answ Setting
and press M.
3.
Ring delay
is displayed. Press M.
4. Scroll
u or d to select
2-9 Rings
or
Toll Saver
.
5. Press
M to conrm.
6. Press
e to return to standby.
Note: If the memory is full, it will automatically revert to Answer Only mode.