40 Using your Answering Machine
2. Press d,
Answ Machine
is displayed.
3. Press
M,
Play
is displayed.
4. Press
M, the handset will start the new message playback. Once all messages are
played, the handset will return to standby.
NOTE
During message playback, press
e anytime to return to standby.
9.12 Memory full
The memory is full if there is less than 15 seconds of recording time left or if the maximum
total of 59 messages have been received.
When the memory becomes full:
•
C flashes quickly on the handset display.
• The machine will automatically switch to Answer Only mode.
If the memory becomes full while a caller is leaving a message, they will hear a beep and
the call is ended.
To Next Page
Loading...
Need help?
General
