Motorola MBP483 User Manual

22 Troubleshooting
7. Troubleshooting
Power/Link Indicator on the Parent Unit does not come on
• Check whether the Parent Unit is powered on.
• Check whether the supplied battery pack is correctly installed and that they
are charged.
• Recharge the Parent Unit by connecting it to the power supply.
Power/Link Indicator on the Baby Unit flashes
• The Baby Unit may not be paired with the Parent Unit. Refer to section 4.8 to
pair the Baby Unit.
• The Parent Unit and the Baby Unit may be out of range with each other.
Reduce the distance between the units, but not closer than 3 feet.
• The Baby Unit may be switched off. Slide the ON-OFF switch on the Baby
Unit to the ON position.
icon on the Parent Unit flashes
• Battery pack in the Parent Unit is running low. Connect the Parent Unit to the
electrical outlet with the supplied power adapter for recharging.
The Parent Unit beeps
• The Parent Unit may have lost connection with the Baby Unit. Reduce the
distance between the Parent Unit and the Baby Unit, but not closer than
3 feet.
• The Baby Unit may be switched off. Slide the ON-OFF switch on the Baby
Unit to the ON position.
• Battery pack in the Parent Unit is running low. Connect the Parent Unit to the
electrical outlet with the supplied power adapter for recharging.
Cannot hear sound or baby crying from the Parent Unit
• The volume level in the Parent Unit may be set too low. Increase the volume
level of the Parent Unit. Refer to section 4.1 for volume level settings.

Motorola MBP483 Specifications

General

Type	-
Maximum range	- m
Volume control	Buttons
Frequency range	2407.5 - 2475 MHz
Channels quantity	21 channels
Number of brightness levels	5
Display type	LCD
Product color	Silver
Operating temperature (T-T)	5 - 45 °C
Battery voltage	3.6 V
AC input voltage	100-240 V
Battery capacity	800 mAh
Power consumption	1000 mA
Power source type	AC, Battery
AC input frequency	50 - 60 Hz
Battery technology	Nickel-Metal Hydride (NiMH)
Receiver power source	Battery
Transmitter power source	AC
LED type	IR
Sensor type	CMOS
Fixed aperture	2.6 mm
Fixed focal length	2.7 mm
Camera resolution (numeric)	0.3 MP
Number of illumination LEDs	6
Display diagonal	2.8 \
Frequency band	2.407 - 2.475 GHz