Motorola MOTOTRBO DP2400 User Manual

Advanced Features
English
41
Utilities
Setting the Squelch Level
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
1 Press the programmed Squelch button.
2 You hear a positive indicator tone, indicating the radio is
operating in tight squelch.
OR
You hear a negative indicator tone, indicating the radio is
operating in normal squelch.
Setting the Power Level
You can toggle your radio’s power setting between high or low
for each channel.
Settings: High enables communication with radios located at a
considerable distance from you. Low enables communication
with radios in closer proximity.
Procedure:
1 Press the programmed Power Level button.
2 You hear a positive indicator tone, indicating the radio is
transmitting at low power.
OR
You hear a negative indicator tone, indicating the radio is
transmitting at high power.


NDP_ANZ-EMEA.book Page 41 Thursday, July 19, 2012 8:22 AM

Motorola MOTOTRBO DP2400 Specifications

General

Channel Capacity	16 channels
Power Output	VHF: 1-5W, UHF: 1-4W
IP Rating	IP55
Digital Protocol	DMR
Operating Temperature	-30°C to +60°C
Programmable Buttons	2
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz