13
English
Volume Adjustment Mode
The Service Provider can enable Volume Adjustment Mode feature.
All the settings regarding Individual mode are adjustable and
retained even if the user switches back to Common mode.
In Common mode the user adjusts all the Volumes at the same
time.
To change the volume setting or settings, press Menu >Setup
> Set Volume.
Dual Control Head
The Dual Control Head feature allows you to have two Control
Heads: Master and Slave, which have the same functionality.
Both Control Heads are turned on independently. To turn on any of
the Control Heads:
• Press and hold On-Off/End/Home Key.
• Press and hold the Rotary knob to turn the MTM800 Enhanced.
Master and Slave Interaction
Master Control Head checks if there is a link between Master and
Slave Control Heads. When there is no connection the icon is
displayed, otherwise the display shows . To see all the icons
available for this feature go to D-PTT Tones on page 21.
If only Slave Control Head is powered on and the Master Control
Head is unavailable, it enters Standalone Mode and only button
can be pressed to turn it of.
Key Pressed
If any key except Emergency button and is pressed on any
Control Head, the icon
is displayed and all the keys are blocked
on the other Control Head.
If this feature is enabled by your Service Provider, one of the icons
is displayed all the time.
At any time Emergency button and can be pressed on both
Control Heads.
To Next Page
Loading...
Need help?
General
