42
English
Making an Emergency Group Call
• Hot Microphone enabled – to initiate an Emergency Group Call,
press and hold Emergency Button.
• Hot Microphone disabled – to initiate an Emergency Group Call,
press and hold Emergency Button. When the display has
changed to Emergency Group Call hold PTT and wait for talk
permit tone (if configured) and talk. Release the PTT to be able to
listen.
Silent Emergency Mode
To enter Silent Emergency Mode, press Emergency button.
Silent Emergency Mode provides no audible and visible indication.
All of the key tones are switched off.
To exit Silent Emergency Mode, press Menu and then key
simultaneously within 3 seconds.
Call-Out
This feature allows the user to receive Call-Out alerts. When the
Call-Out messages have been received by the radio, it interrupts
current services and attends to the Call-Out alert without any further
delay. After Call-Out alert has been cleared, the radio exits Call-Out
mode and reverts back to normal mode. The user is able to receive
only Emergency Calls during Call-Out mode. There are four types of
the Call-Out alert:
• Normal Call-Out
• Storm plan – it is sent to a group several time to raise reliability.
User can only accept the Call-Out by pressing any button and is
moved to information phase (soft keys are not labelled).
• Fallback Mode – it includes only voice communication. It can be
cleared manually
• Test Call-Out – dispatcher has the ability to test this feature.
Radio is generating the tone with Call-Out Test on the display.
Only one softkey is enabled Test OK to confirm and to clear the
test.
Silent Emergency Mode needs to be enabled by the Service
Provider to be able to use it.
Fallback is only possible when Radio is in Local Site Trunking.
To Next Page
Loading...
Need help?
General
