• After the call, the LED indicator flashes if the IPA has the highest priority at the time.
NOTE:
If you receive multiple IPAs from the same contact, there will only be one entry in the IPA list
with the latest IPA at the top.
If you receive an IPA from someone not in your Contacts List, ?
is displayed before their alias.
Procedure:
1 To view the IPA list, from the menu, select Instant Personal Alert List.
2 Scroll through the IPA list using Talkgroup Scroll Rocker or Volume Up and Volume Down.
NOTE: The IPA list consists up to nine IPA entries.
When the list is reaching the end or the beginning, a tone sounds.
7.3
Clearing IPA Status List
Procedure:
Perform one of the following actions:
•
From the Contact list or IPA list, select the contact that you want to clear and press and
hold the PTT button to make a call.
• In the IPA Status List, press and hold the Menu/Programmable button on the contact that
you want to clear.
• Power cycle your radio to clear all the IPAs.
When all IPAs are cleared, your radio shows the following indications:
• The LED indicator stops blinking.
• The IPA list will no longer be displayed.
MN009326A01-AA
Chapter 7 : Instant Personal Alert
31
To Next Page
Loading...
Need help?
General
