37
PROGRAMMING FEATURES
CPS and Cloning Cables (Optional
Accessory)
•Both CPS and Cloning Cables are made to work
either with XT Series radios or XTNi Series
radios. Cloning cable supports a mix of XT and
XTNi series radios.
• CPS cable programs XT series radios. Make sure
the cable switch is in “Flash” or “CPS” position. To
program a XTNi radio with the CPS cable, make
sure the cable switch is in “CPS” position and the
USB converter provided in the CPS cable kit is
attached to the cable.
• Cloning cable allows you to clone:
–XT Series radios. Make sure the switch is in
“Cloning” or “Legacy” position.
–XTNi Series radios. Make sure the switch is in
“Legacy” position with one USB converter on
each end of the cloning cable.
–XT Series and XTNi Series radios. Make sure
the switch is in “Legacy” position and use a
USB converter to the XTNi Single-Unit Charger.
The Cloning Cable Kit provides 1 USB
converter.
CPS Cable
Cloning Cable
Cloning Cable
Unique Micro to Mini Converter
63M03_A_BRCAN_en.book Page 37 Monday, November 19, 2018 11:30 AM
To Next Page
Loading...
Need help?
General
