Motorola XTN Series User Manual

11
PRELIMINARY
Programming Mode
k
Setting the Interference Eliminator Code
The Interference Eliminator Code helps minimize interference by providing you with
a choice of code combinations.
Make sure k is accessed. Please refer to Programming Mode on page 9.
Note: To hear everyone on your frequency, select Interference Eliminator Code 0.
Setting Eavesdrop Reducer (2 watt models only)
Your radio has the Eavesdrop Reducer feature, a scramble code that makes
your transmissions sound garbled to anyone listening without the same code.
It doesn’t guarantee confidentiality, but it adds an extra layer of privacy.
Note: All the radios have to be set to the same Eavesdrop Reducer for transmission
to be clear.
• Make sure k is accessed. Please refer to Programming Mode on page 9.
• Press \ as needed until e is displayed, then
• Press
[
or
]
to choose the scramble code.
•
Select code 1 , 2, or 3. Factory Default is set at 0 (Off).
When you exit k, radio displays e.
• To set the code, press \ until the code number display begins
to flash.
• Then press
[
or
]
to choose the code.
e
6881038B80.book Page 11 Thursday, August 30, 2001 5:33 PM

Motorola XTN Series Specifications

General

Brand	Motorola
Model	XTN Series
Category	Two-Way Radio
Language	English