19
PRELIMINARY
User Menu Features
X
Setting Preferences for Scanning/Scan List
By using J, you can monitor channels and codes for transmissions and lock in on
a specific channel.
• To start scanning, briefly press
J
.
Your channel/code screen displays
h
and begins to scroll through channels. When
the radio detects channel activity, it stops on that channel and displays its channel and
code. You can talk to the person(s) transmitting without having to switch channels by
pressing
M
.
• To stop scanning, briefly press
J
.
If you press
M
while the radio is scanning, the radio will transmit on the channel
which was selected before you activated Scan.
If no transmission occurs within five seconds, scanning will resume.
If you want to scan channels without interference eliminator codes, change the code
for your set channel to 0 before you briefly press J.
Nuisance Delete/ Manual Advance While Scanning
Note: While scanning you can quickly delete a channel that the radio has loaded for
an indefinite period of time by pressing
[ once, i.e. shortcut to Scan List
Editing. You can also advance to the next channel with activity by manually
pressing
].
6881038B80.book Page 19 Thursday, August 30, 2001 5:33 PM
To Next Page
Loading...
Need help?
General
