2-3
Hardware Setup
Memory
FSB
DDR266 DDR333 DDR400 DDR433 DDR466 DDR500 DDR533
FSB400 OK N/A N/A N/A N/A N/A N/A
FSB533 OK OK N/A N/A N/A N/A N/A
FSB800 OK OK OK OK * OK * OK * OK*
Central Processing Unit: CPU
CPU Core Speed Derivation Procedure
If CPU Clock = 100MHz
Core/Bus ratio = 20
then CPU core speed = Host Clock x Core/Bus ratio
= 100MHz x 20
= 2.0 GHz
The mainboard supports Intel
®
Pentium
®
4 Northwood/Prescott proces-
sor in the 478 pin package. The mainboard uses a CPU socket called PGA478
for easy CPU installation. When you are installing the CPU, make sure the
CPU has a heat sink and a cooling fan attached on the top to prevent overheating.
If you do not find the heat sink and cooling fan, contact your dealer to pur-
chase and install them before turning on the computer.
Memory Speed/CPU FSB Support Matrix
*: Overclocking spec. Please refer to P.10 “Memory Modules” in the ap-
pendant Test Report for the list of qualified test memory modules.
MSI Reminds You...
Overclocking
This mainboard is designed to support overclocking. However,
please make sure your components are able to tolerate such
abnormal setting, while doing overclocking. Any attempt to
operate beyond product specifications is not recommended.
We do not guarantee the damages or risks caused by
inadequate operation or beyond product specifications.
To Next Page
Loading...
Need help?
General
