2-18
MS-6728 ATX Mainboard
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, for
this might cause the loss of data during the transmission.
PIN SIGNAL PIN SIGNAL
1 GND 2 TXP
3 TXN 4 GND
5 RXN 6 RXP
7 GND
SATA1~ SATA2 Pin Definition
Serial ATA Connectors controlled by ICH5: SATA1, SATA2
The Southbridge of this mainboard is ICH5 which supports two serial
connectors SATA1 & SATA2.
SATA1 & SATA2 are dual high-speed Serial ATA interface ports. Each
supports 1
st
generation serial ATA data rates of 150 MB/s. Both connectors are
fully compliant with Serial ATA 1.0 specifications. Each Serial ATA connector
can connect to 1 hard disk device.
7
1
SATA2 SATA1
Connect to serial ATA ports
Take out the dust cover and
connect to the hard disk
devices
Optional Serial ATA cable
To Next Page
Loading...
Need help?
General
