3-21
BIOS Setup
Integrated Peripherals
Please note that the options showed on your BIOS might be different
depending on the motherboard you buy.
USB Controller
This setting is used to enable/disable the onboard USB controllers.
USB Device Legacy Support
Set to All Device if you need to use any the USB 1.1/2.0 device in the operat-
ing system that does not support or have any USB 1.1/2.0 driver installed,
such as DOS and SCO Unix. Set to Disabled only if you do not want to use
any USB device. Set to Keyboard+Mouse if you only want to use keyboard
and mouse. Setting options: Disabled, Keyboard+Mouse, All Device.
On-Chip IDE Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
To Next Page
Loading...
Need help?
General
