3-30
MS-6728 ATX Mainboard
DDR Clock (Mhz)
This read-only item allows you to view the current DDR clock.
Adjust AGP/PCI Clock (Mhz)
This item allows you to select the AGP/PCI clock frequency (in MHz) by
adjusting the AGP/PCI clock to a higher frequency.
CPU Vcore Adjust (for Northwood CPU only)
The setting allows you to adjust the CPU Vcore voltage. Available options:
Yes, No.
CPU Voltage (V) (for Northwood CPU only)
The setting is adjustable if you set the “CPU Vcore Adjust” to “Yes”.
DDR Power Voltage
Adjusting the DDR voltage can increase the DDR speed. Any changes made
to this setting may cause a stability issue, so changing the DDR voltage for
long-term purpose is NOT recommended.
AGP Power Voltage
AGP voltage is adjustable in the field, allowing you to increase the performance
of your AGP display card when overclocking, but the stability may be affected.
MSI Reminds You...
Changing CPU Ratio/Vcore could result in the instability of the
system; therefore, it is NOT recommended to change the default
setting for long-term usage.
MSI Reminds You...
The settings shown in different color in CPU Voltage (V), DDR
Power Voltage and AGP Power Voltage helps to verify if your
setting is proper for your system.
White: Safe setting.
Yellow: High performance setting.
Red: Not recommended setting and the system may be unstable.
To Next Page
Loading...
Need help?
General
