A-5
Realtek Audio
MS-7623
Appendix A
Display Mode
The VIA Adeck has two basic display modes: “Simple Mode” and “Full Mode”.
Simple Mode
Once Adeck has been launched, the panel will be displayed in the center of windows
desktop. The Adeck system is initialized using the simple mode. In this mode, the user
only has limited control and audio information. The basic controls include: master vol-
ume and mute. The basic audio information includes: peak meter, number of channels,
S/PDIF out status or sound eect status, etc.
If you want to control the sound eects in detail, you can click on the buttons located on
the lower portion of the panel. These buttons are labeled: Speaker, Mixer, Eect, Jack,
S/PDIF and Info. When any of the buttons are activated, the Adeck system will go into
full mode for detailed control.
To exit Adeck, simply click the Power button on the Adeck panel.
Full Mode
In the full mode, the bottom portion of Adeck expands. Depending upon the button that
was selected, dierent panels will be displayed in the expanded portion.
To Next Page
Need help?
General
