Promise FastTrak 579 Parallel ATA / Serial ATA RAID Introduction
5-37
On Demand Synchronization
In addition to schedule Synchronization, you can direct FastTrak to begin the
Synchronization process immediately. To access this feature:
1. Right-click on the Array icon and select Synchronize from the popup
menu.
2. Click OK to the confirmation message.
Information View displays the progress (below).
During the Synchronization, the array will be available for use but it may run
noticeably slower.
If the popup messages are enabled, one will notify you when the Synchronization
is successfully completed. The array will return to Functional status.
Stop, Pause, Continue
Promise recommends that you let your rebuild run to completion. If you need to
pause the process:
1. Right-click on the icon of the Array that is rebuilding and select Pause from
the popup menu.
2. To continue, right-click on the same icon again and select Continue from the popup
menu.
To Next Page
Loading...
Need help?
General
