2-16
MS-6702E ATX Mainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN, USB
Ports, IR module and CPU/System FAN.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.
Connectors
FDD1
Fan Power Connectors: CFAN1 / SFAN1 / PWF_FAN1 / PWF_FAN2
The CFAN1 (processor fan), SFAN1 (system fan 1), PWF_FAN1 (Power Supply fan)
and PWF_FAN2 (Power Supply fan) support system cooling fan with +12V. It sup-
ports three-pin head connector. When connecting the wire to the connectors, al-
ways take note that the red wire is the positive and should be connected to the +12V,
the black wire is Ground and should be connected to GND. If the mainboard has a
System Hardware Monitor chipset on-board, you must use a specially designed fan
with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CFAN1 supports the fan control. You can install Core Center
utility that will automatically control the CPU fan speed according
to the actual CPU temperature.
3. Please refer to the recommend CPU fans at AMD
®
official website.
PWF_FAN1
+12V
GND
NC
PWF_FAN2
+12V
GND
NC
CFAN1
SFAN1
SENSOR
+12V
GND
SENSOR
+12V
GND
To Next Page
Loading...
Need help?
General
