MTS Sensors Temposonics V SSI R Series User Manual

Temposonics
®
R-Series V SSI
Operation Manual
I 8 I
n Resolution
1
5 µm
2
10 µm
3
50 µm
4
100 µm
5
20 µm
6
2 µm
7
0.1 µm
8
1 µm
9
0.5 µm
m Format
B
Binary
G
Gray
k Mode
1
Measuring direction forward, asynchronous mode
2
Measuring direction forward, synchronous mode 1
3
Measuring direction forward, synchronous mode 2
4
Measuring direction forward, synchronous mode 3
5
Measuring direction reverse, asynchronous mode
6
Measuring direction reverse, synchronous mode 1
7
Measuring direction reverse, synchronous mode 2
8
Measuring direction reverse, synchronous mode 3
l Data length
1
25 bit
2
24 bit
3
26 bit
A
24 bit + alarm bit + parity bit
o Additional options (optional)
S 0 0
2
FIR  lter (2 measurements)
S 0 0
4
FIR  lter (4 measurements)
S 0 0
8
FIR  lter (8 measurements)
S 0 0 A
No  lter, error counter (4 cycles)
S 0 0 C
No  lter, error counter (8 cycles)
S 0 0 D
No  lter, error counter (10 cycles)
S 0 0 G
FIR  lter (8 measurements),
error counter (10 cycles)
S 0 0 J
IIR  lter ( lter grade 4)
S 0 0 K
IIR  lter ( lter grade 8)
S 0 0 N
IIR  lter ( lter grade 4),
error counter (10 cycles)
NOTICE
• Specify the number of magnets for your application and order the
magnets separately.
• The number of magnets is limited by the stroke length.
The minimum allowed distance between magnets (i.e. front face
of one to the front face of the next one) is 75 mm (3 in.).
• Use magnets of the same type for differential measurement,
e.g. 2 × U-magnet (part no. 251 416-2).
• If the option for internal linearization in
j
“Options” is chosen,
select a suitable magnet.

MTS Sensors Temposonics V SSI R Series Specifications

General

Brand	MTS Sensors
Model	Temposonics V SSI R Series
Category	Accessories
Language	English