00-02-0796 - 12 - 08-26-11
Unless selected in the OEM Menu, DPF REGEN does not
display in the Main Menu. When available, the following
options are presented:
1. AUTO DPF REGEN – This is the factory default. Select
and PowerView sends a CAN message to the ECU to
perform DPF Regeneration (regen) automatically
whenever needed.
2. REQUEST DPF REGEN – Select this and a second
screen, REQUEST DIESEL PARTICULATE FILTER
REGEN, displays. Use this to force a regen when auto-
regen is not due or is inhibited by PowerView. Touch
YES (Enter) and PowerView sends a request for a
regen every second for 10 seconds. If the engine does
not respond, PowerView defaults back to Auto DPF
Regen. You may send the request again or exit without
sending a request by touching CANCEL (Menu). You
return to the Main menu.
3. INHIBIT DPF REGEN – In cases where regen cannot
be performed due to restrictions, select this to eliminate
the possibility of a regen occurring. The inhibit lamp
displays when the engine ECU responds to this inhibit
request from PowerView. Once this option is selected, it
To Next Page
Loading...
Need help?
General
