National Instruments M Series User Manual

© National Instruments Corporation D-1 M Series User Manual
D
Upgrading from E Series to
M Series
The following KnowledgeBase and Developer Zone documents will help
you overcome typical hurdles in upgrading from E Series to M Series
devices.
• Major Differences Between E Series and M Series DAQ Devices
KnowledgeBase lists the advantages of M Series over E Series and the
functional differences and other differences between the two DAQ
device families. To access this KnowledgeBase, go to
ni.com/info
and enter the info code
rdmess.
• Migrating an Application from E Series to M Series Developer Zone
document highlights the main differences to remember when moving
an application from E Series to M Series devices. To access this
document, go to
ni.com/info and enter the info code rde2m1.
• Using E Series Accessories with M Series Devices KnowledgeBase
describes how to use 68-pin E Series accessories with M Series
devices. To access this KnowledgeBase, go to
ni.com/info and enter
the info code
rdea2m.
• M Series or S Series Devices Are Not Detected During Installation on
Some Computers KnowledgeBase describes the difference between
M Series and E Series power rails, and the PCI specification for the
PCI bus and power rails, and contains an up-to-date list of computers
with power rails that do not support M Series devices. To access this
KnowledgeBase, go to
ni.com/info and enter the info code
rdmseis.

National Instruments M Series Specifications

General

Brand	National Instruments
Model	M Series
Category	Media Converter
Language	English