© National Instruments | B-1
B
Where to Go from Here
This section lists where you can find example programs for the cDAQ chassis and C Series
modules and relevant documentation.
Example Programs
NI-DAQmx software includes example programs to help you get started programming with the
cDAQ chassis and C Series modules. Modify example code and save it in an application, or use
examples to develop a new application, or add example code to an existing application.
To locate NI software examples, go to
ni.com/info and enter the Info Code daqmxexp. For
additional examples, refer to
ni.com/examples.
To run examples without the device installed, use an NI-DAQmx simulated device. For more
information, in Measurement & Automation Explorer (MAX), select Help»Help Topics»
NI-DAQmx»MAX Help for NI-DAQmx and search for simulated devices.
Related Documentation
Each application software package and driver includes information about writing applications
for taking measurements and controlling measurement devices. The following references to
documents assume you have NI-DAQmx 16.0 or later.
cDAQ Chassis Documentation
The NI cDAQ-9181 Quick Start, NI cDAQ-9184/9188 Quick Start, or NI cDAQ-9191 Quick
Start, packaged with your cDAQ chassis, describes how to install your NI-DAQmx for Windows
software, how to install the cDAQ chassis and C Series module, and how to confirm that your
device is operating properly.
The NI cDAQ-9181 Specifications, NI cDAQ-9184 Specifications, NI cDAQ-9188
Specifications, or NI cDAQ-9191 Specifications lists all specifications for your cDAQ chassis.
Go to
ni.com/manuals and search for your cDAQ chassis.
The NI cDAQ-9181 Safety, Environmental, and Regulatory Information, NI cDAQ-9184 Safety,
Environmental, and Regulatory Information, NI cDAQ-9188 Safety, Environmental, and
Regulatory Information, or NI cDAQ-9191 Safety, Environmental, and Regulatory Information
packaged with your cDAQ chassis, includes important hazardous locations information,
compliance precautions, and connection information for your cDAQ chassis. Go to
ni.com/
manuals
and search for your cDAQ chassis.
To Next Page
Loading...
Need help?
General
