EasyManuals Logo
Home>Navien>Boiler>NFB Series

Navien NFB Series User Manual

Navien NFB Series
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24 Installing the System Piping
3. Attach the clip to the condensate trap.
4. Ensure that the condensate trap is firmly fixed to the bottom
of the boiler.
3.2 Connecting the Condensate Drain
The Navien NFB boiler creates condensation when it operates.
This condensation has an acidic pH of 3-5. Follow all local codes
and regulations when disposing of condensate from the boiler.
We recommend draining the condensate into a laundry tub,
as the alkali in laundry detergent will neutralize the acid in the
condensate. However, other suitable waste drain locations may be
used according to the local codes.
CAUTION
Do not cap or plug the integrated condensate line. If
prevented from draining, condensate can damage the boiler.
The condensate line must have a negative slope to drain
properly.
To attach the condensate trap to the boiler:
1. Check the components of the condensate trap.
2. Insert the condensate trap to the drain adapter at the bottom
of the boiler.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Navien NFB Series and is the answer not in the manual?

Navien NFB Series Specifications

General IconGeneral
BrandNavien
ModelNFB Series
CategoryBoiler
LanguageEnglish

Related product manuals