EasyManuals Logo
Home>NEC>Switch>2400

NEC 2400 User Manual

NEC 2400
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background image
Issue 2 December 1995 A-9
Clearing Your Configuration
Clearing Your Configuration
When you add voice mail ports or change the switch dial plan, you may need to
reconfigure the SID. In most cases, you can accomplish the task by editing the
existing setup and restarting the system. If required, the SID provides the
capability to restore the factory default settings.
To clear your configuration and restore the factory setting, use the following
instructions.
1. Press to access the Main Menu.
2. Press to select the Setup option. After you press the key, you see the
SETUP menu as shown in the following example:
0
3. Press to select Clear. After you press the key, you see the Clear Setup
screen as shown in the following example:
0
4. Press to cancel the clear and return to the SETUP menu.
Press to restore the factory default settings. When you clear your
configuration, you remove all global parameter information, dial plan,
logical terminal number information, and SMDI and MCI serial port
information. The contrast and Enhanced MWI handling settings are
restored to the factory defaults. The only information preserved are your
error logs and statistical tables. Using the clear command stops the
integration. You must configure and start the system to integrate calls.
SETUP 1-Params 2-Ports 3-Clear
4-Advanced
CLEAR SETUP? 1-Yes 2-No
FUNC
4
3
2
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC 2400 and is the answer not in the manual?

NEC 2400 Specifications

General IconGeneral
BrandNEC
Model2400
CategorySwitch
LanguageEnglish

Related product manuals