B-2 Issue 2 December 1995
SMDI Monitor Mode
The first option on the View menu is the SMDI monitor mode. The mode permits
you to observe transactions as they occur on the SMDI data link that connects
the SID to the INTUITY System. The SMDI monitor is a useful tool that provides
condensed, real-time reporting of all transactions on the SMDI data link. The
SMDI link connects the SID to the INTUITY System. The view is set as the default
display mode for a configured SID. When the system first boots up and is idle,
the display appears as shown in the following example:
Use the following instructions to access the SMDI monitor mode.
1. At the NEC Main Menu, press to select the View option. You see the
following screen:
2. Press to select the SMDI option and access the SMDI0 view screen as
shown in the following example:
3. To exit the SMDI view screen, press to return to the NEC Main
Menu.
SMDI Idle
VIEW 1-SMDI 2-MCI 3-Stats
4-Metrics
SMDI MWI
CPID ..MD0010002B0000201 0000202...
1
1
To Next Page
Loading...
Need help?
General